You should be sitting next to the toilet with a sleeve attached and the sleeve end in the toilet. Holding the cone upright, open the clamp slightly to let water into the tube. Once water starts to come out, close the clamp. Making sure the clamp is closed, slide the cone into your stoma. Once the cone is in place, slowly open the clamp on the tubing. Allow the water to flow gently into the stoma for about 10 minutes. Then close the clamp on the tubing. Wait for about a minute, then remove the cone. Seal the top of the sleeve. Allow stool and water to flow through the sleeve and into the toilet for 40 minutes. When stool and water stop flowing, remove the sleeve and empty it into the toilet, clean and dry the skin around the stoma. Cover the stoma with a small pouch to catch any drainage. You can get up and move around freely during this time. Fill the sleeve with three parts warm water, and one part vinegar, then hold it closed and shake. Empty it and rinse with water. Hang it to air-dry. When you are done, wash your hands.
Featured in
Related Articles
How to Empty Your 1 Piece Pouch System
Learn the process of emptying a 1 piece pouch system, including three different positions to use, depending on what is most comfortable.
How to Empty Your 2 Piece Pouch System
Learn the process of emptying a 2 piece pouch system, attaching a new pouch to the wafer and cleaning the area around the wafer and stoma.
Ileostomy: Caring for Your Stoma
You need to take care of your stoma and the skin around it (peristomal skin). That means keeping the stoma and the skin clean. It also means protecting the skin from moisture and contact with stool. This helps prevent skin problems and odor.
How to Change Your 1 Piece Ostomy Skin Barrier
Watch and understand how to properly change your 1 piece ostomy skin barrier.
